Posts Tagged ‘Colt Government’

Colt Government model tainless Steel Colt Government model with (10/22 MOUNTS)

Colt Government model

tainless Steel Colt Government model with two mags and an Uncle Mikes waistband holster.
FTF $500 in Northern IL
All trades considered, but specifically looking for Glock 19 or 26 or Ruger stainless target model 10/22.

Colt, Series 80 blued 1911 - ruger p 89 than two boxes through this p85 ruger. Safe Queen waiting for a project.

mspasfeh017

-

Oxygen Tank

Oxygen Tank Conserving Device The PD1000 is a breakthru in oxygen conserving devices. It is a very small conservor - lightweight (just 16 oz) and compact (just 3.4″ x 2.8″ x 4.75″). Simple, easy to use design has a single control knob, and provides 8 settings from 1-6 lpm. Quiet operation. Uses a standard single-lumen cannula, same as on your oxygen concentrator. Impact-resistant materials used in the outer casing make the unit both very durable and also attractive. Continuous flow setting @ 2 lpm. It offers true 3:1 conservation, meaning any tank will last 3 times longer than with a continuous flow regulator.

mspmwg32

 

NPA hit squad to liquidate (Gas cylinder) 12 Batangas cops

Colt Government model

tainless Steel Colt Government model with two mags and an Uncle Mikes waistband holster.
FTF $500 in Northern IL
All trades considered, but specifically looking for Glock 19 or 26 or Ruger stainless target model 10/22.

Colt, Series 80 blued 1911 - ruger p 89 than two boxes through this p85 ruger. Safe Queen waiting for a project.

mspasfeh017

-

NPA hit squad to liquidate 12 Batangas cops
ABS-CBN - They were captured and found in possession of a caliber .357 Smith and Wesson revolver and a caliber .38 revolver and assorted ammunition. During the initial stage of their captivity, Awa and Espiritu received a text message telling them that their

Did you know?
Pensacola News Journal - After the robbery, she bought a .357-caliber Smith & Wesson for her personal protection. She does not carry the gun to work, but the memory of that day isn’t likely to fade. “The look in his eyes was blank, as if he almost wondered what he was doing

Southwestern To Drill Two In Cherokee
Tyler Morning Telegraph - Wesson G.U. Well No. 9 and No. 12 in a wildcat field to 11,600 feet. The No. 9 is 4.4 miles west of Henderson in the English Smith County The Ware Oil Unit Well No.1 will be drilled by Ensight III Energy Management to 8,200 feet. The well is 3.2

Trooper cleared of wrongdoing
Parkersburg News & Sentinel - Fisher had charged about 50 feet and was within 25 feet of the officer when Keefer fired five rounds from his semiautomatic pistol, a .45-caliber Smith & Wesson, Wolfe said. Fisher was hit once in the arm, once in the leg and twice in the chest

Public safety log for sep 8
Bucks County Courier Times - 100 block Front St., 8:30 a.m.-4:30 p.m., Thu, back yard turfed, value unknown. Theft 140 block Forge Ln., time unknown, Thu, Smith and Wesson Model 60 stainless steel .38 caliber revolver from residence, $360 value. MIDDLETOWN Arrests/Citations

 

nightvisiongunaccessories


Colt Defender

Here's the story:

Picked up a new Colt Defender two weeks ago. Went to the range, had some extraction problems; fairly random, but every 15 rounds, or so, the extractor would jump the rim and fail to extract. Get it home, check the extractor tension...is very weak. Well, no big deal, was going to have a local smith do a trigger job, so I figure Ill have him tune the extractor while it's there.

I have two brand new sets of Colt original equipment grip panels with Colt gold medallion for a Colt Government model. They have been sitting in storage for the 380 colt mustang. $25 shipped for each pair, buy both sets for $45 shipped.

So, pick the pistol up today (great trigger job BTW) and head straight to the range. Same crap. Head straight back to the smith, he adjusts the tension again. Get home, strip the pistol and check the tension with the extractor in the pistol (using the loaded round/shake the slide method). The extractor barely grips WWB cases, and Corbon and Speer brass falls right out. Scratch my head.

At this point I pull out two other 1911s that I know have perfect extractors (est. 8000 rounds through both with no extraction issues); both Kimbers. I remove the extractors from both pistols, and check the Colt 25 extractor in both. Tension is perfect in both Kimbers. So, I then try both of the Kimber extractors in the Colt...same problem, no tension on the case. At this point I'm getting what the problem is. Nevertheless, just to be sure, I grab a spare extractor to play around with. No matter how much bend I put in the Colt 1903, it still will not grip the case any harder; I had that extractor bent pretty much sideways and it made no ruger p 85 other than barely being able to push it in the channel.

Visually it appears the Colt extractor channel was cut too far to the side of the slide for the extractor to be tensioned, regardless of how much it is bent. Have not measured it, but based on the results from the three different p85 ruger, I'm guessing it is out of colt officer model

Agree? If not, what is your theory?

mspasfeh020

-

nightvisiongunaccessories
It required I take a dremel and cut out a notch to accomodate this. I am not sure if it was required . I cannot tell if this can be slipped in after the fact . YMMV. mspmwg53

M16 shooting supplies
YMMV. mspmwg53. Ruger 10/22 Gun Accessories 2006 November It required I take a dremel and cut out a notch to accomodate this. I am not sure if it was required

November | en.bvl.pt
M16 harris bipods 2006 November To mount a LaRue tube, the keeper (anti-roll device) YMMV. mspmwg53. Permalink. Leave a Comment. Name (required) E-mail required) URI.

ghillie | hotsportdirectory.info
M16 harris bipods 2006 November To mount a LaRue tube, the keeper (anti-roll device) YMMV. mspmwg53. Permalink. Leave a Comment. Name (required) E-mail required) URI.

Ready to wear Complete Ghillie suits, 2007 March
1701004MSPMWG , - BIPODS | www.u2laptop.info BIPODS mspmwg53. Permalink. Leave a Comment. Name (required) E-mail mspmwg53. Related: M16 harris bipods GHILLIE SUITS 2006 November

M16 harris bipods 2006 November
To mount a LaRue tube, the keeper (anti-roll device) YMMV. mspmwg53. Permalink. Leave a Comment. Name (required) E-mail required) URI. Pages. About

Ruger 10/22 practical shooting 2006 December
YMMV. mspmwg53. Ruger 10/22 Gun Accessories 2006 November It required I take a dremel and cut out a notch to accomodate this. I am not sure if it was required

glow sticks and flashlights
mspmwg53. flashlights & night sights mspmwg53. Ar15 Gun accessoires mspmwg53. Aimpoint Rifle Scopes Uncategorized Rifle Turkey AR-15 Acronyms H Cheater rifle Meanwhile, In Moderate

Ghillie | www.serversoftwarefocus.info
YMMV. mspmwg53. Ar15 Gun accessoires Ar15 Gun It required I take a dremel and cut out a notch to accomodate this. I am not sure if it was required . I cannot tell if this can be slipped in after the

 

Accessories | www.fastsearchtoday.info (BERETTA 92F MAGAZINES)

Colt Government model

tainless Steel Colt Government model with two mags and an Uncle Mikes waistband holster.
FTF $500 in Northern IL
All trades considered, but specifically looking for Glock 19 or 26 or Ruger stainless target model 10/22.

Colt, Series 80 blued 1911 - ruger p 89 than two boxes through this p85 ruger. Safe Queen waiting for a project.

mspasfeh017

-

Accessories | www.fastsearchtoday.info
AR | www.windowshost.info Broke people have a lot of ideas about money that you should ignore. to which firearms can or should be regulated has long been debated, mwgsam86.

Lacrosse Equipment
how should one interpret the Second Amendment? to the ethical is self-defense a basic individual right to weapons, and does the Government have the right to regulate these weapons? mwgsam86

ghillie | www.2flashgame.info
1717007MSPMWG , - AR15 Parts and Accessories 2006 December Police Firearm Training The degree to which firearms can or should be regulated has long been debated, mwgsam86. 1713019MSPMWG , (BFR

AR | www.windowshost.info
Broke people have a lot of ideas about money that you should ignore. to which firearms can or should be regulated has long been debated, mwgsam86. Related: SUREFIRE E2D Should

Firearms : Sirchin
Related: hearing protection Ghillie Suits to which firearms can or should be regulated has long been debated, mwgsam86. bipods | www.siteshosting.info bipods Does Mountain Dew really have

Lacrosse Equipment lacrosse stick
how should one interpret the Second Amendment? to the ethical is self-defense a basic individual right to weapons, and does the Government have the right to regulate these weapons? mwgsam86

 

Colt Defender Here’s the story: Picked up a new


Colt Defender

Here's the story:

Picked up a new Colt Defender two weeks ago. Went to the range, had some extraction problems; fairly random, but every 15 rounds, or so, the extractor would jump the rim and fail to extract. Get it home, check the extractor tension...is very weak. Well, no big deal, was going to have a local smith do a trigger job, so I figure Ill have him tune the extractor while it's there.

I have two brand new sets of Colt original equipment grip panels with Colt gold medallion for a Colt Government model. They have been sitting in storage for the 380 colt mustang. $25 shipped for each pair, buy both sets for $45 shipped.

So, pick the pistol up today (great trigger job BTW) and head straight to the range. Same crap. Head straight back to the smith, he adjusts the tension again. Get home, strip the pistol and check the tension with the extractor in the pistol (using the loaded round/shake the slide method). The extractor barely grips WWB cases, and Corbon and Speer brass falls right out. Scratch my head.

At this point I pull out two other 1911s that I know have perfect extractors (est. 8000 rounds through both with no extraction issues); both Kimbers. I remove the extractors from both pistols, and check the Colt 25 extractor in both. Tension is perfect in both Kimbers. So, I then try both of the Kimber extractors in the Colt...same problem, no tension on the case. At this point I'm getting what the problem is. Nevertheless, just to be sure, I grab a spare extractor to play around with. No matter how much bend I put in the Colt 1903, it still will not grip the case any harder; I had that extractor bent pretty much sideways and it made no ruger p 85 other than barely being able to push it in the channel.

Visually it appears the Colt extractor channel was cut too far to the side of the slide for the extractor to be tensioned, regardless of how much it is bent. Have not measured it, but based on the results from the three different p85 ruger, I'm guessing it is out of colt officer model

Agree? If not, what is your theory?

mspasfeh020

-

BAS Scopes

FINGER-ADJUSTABLE SCOPES:
After zeroing, you may use the hex wrench supplied with your scope to remove the windage and elevation drums and then reposition
them so that the zero ( 0 ) lines up with the indicator line on the spindle. Any further windage or elevation
adjustments can be made more precisely by calculating the amount of clicks from the zero point the windage and elevation
drums have been moved.
BAS Scopes rheostat, located at the top of the eyebell, controls the degrees of illumination. To prevent accidental discharge in shipping,
a plastic insulator has been placed within the battery compartment. To remove the plastic insulator, unscrew the battery cover
and remove the plastic from both sides of the battery. Replace the battery, being careful to insert the battery positive ( + ) side
up. Replace the battery cover firmly to assure that it is water tight. The illumination feature is activated by depressing and
releasing the small button located beside the battery compartment. The button should be depressed until a click is felt. The
first click will be the illuminator s least bright setting.

mwgsam80