LWRCI PSD

The PSD is in the PDW (Personal Defense Weapon) class of weapons. It has a very short 8" barrel. To compensate for the short barrel it is chambered in 6.8mm SPC. Bigger heavier bullets can achieve greater energy in short barrels. KADDB plan on producing the PSDs both with the sub-carbine barrel and a longer carbine barrel.

Regardless of how limited its deployment will be this must be one of the first if not the first, 6.8mm weapons to be officially adopted by a nations armed forces.

KADDB may also produce the AR-10 style LWRC International Rapid Engagement Precision Rifle (REPR).

[ Many thanks to Daniel E. Watters for the info ]

Austin Precision Products, now LaRue Tactical, made 1911 parts back in the 90s. Daniel E Watters says ...

Given some of the features like the EDM wire cut breechface, one suspects that he had been supplying parts for other Texas firms whose initials might include the letters S, T, and I; or C, M, and C. On his industry forum on AR15.com, Mark LaRue has mentioned that he is considering reintroducing the parts.

This handsome fellow is non-other than Tom Dresner. Dresner is notable for being the founder of HKPro.com. Last year he was promoted to Deputy Chief of the Columbia Police Department.

[ *Many thanks to Daniel E. Watters for emailing me the photos * ]

New machines were still being installed at the 26,687-square metre plant as The Malay Mail was shown around by Colt Defence executive vicepresident James R. Battaglini.

It takes 3 1/2 hours to complete a single M4 and the plant can churn out 900 a day with options for more when required.

The finished product then go below the plant for the test-firing process to ensure it performed to specifications.

Colt boasts a record of every gun made so that if it does not perform well, the company can determine if it is made to specs.

You may be thinking what a Malaysian newspaper is doing in West Hartford, Connecticut? Back in 2007 Malaysia announced plans** to switch away from the Steyr AUG and adopt the M4.

The Malay Mail also has a photo of some rare Colt pistols. Daniel Watters told me ...

there is one interesting picture showing a couple of rare Colt prototype pistols. These include the SSP and their submission for SOCOM's OHWS competition. I don't have a definitive name for the pistol above the OHWS, but I believe it was going to used as the platform for their "Smart Pistol". It certainly doesn't match any AA2000 variant that I remember.

[ Many thanks to Daniel E. Watters for sending me the link. ]

The first 7.62 mm Kalashnikov round hit the weapon head on, narrowly missing the barrel and tearing apart the bodywork, while the second blew the sight off and the third smashed into the side, ripping through the inside of the gun and blasting out of the pistol grip.

Miraculously none struck Pte Cole, already wounded twice in the battle, and last night he saw the remains of the weapon for the first time since it saved his life in the Taliban ambush two years ago.

The remains of the rifle is now proudly display at the 4th Battalion HQ.

[ Many thanks to Daniel E. Watters for sending me the link. ]

Dan Lamothe, who broke the news, updated his The Marine Times article and added that it now appears that the H&K IAR has not officially won but is the frontrunner ...

With several months of testing ahead, the decision isn’t considered final, but it makes the H&K model the clear front-runner in the competition.

...

The Corps will now put H&K IAR through five months of testing beginning in January and taking place in locations ranging from Panama to the Marine Corps Air Ground Combat Center and Marine Corps Mountain Warfare Training Center in California, Eby said. The Corps has ordered 24 H&K IARs for testing, said Capt. Geraldine Care

Rob Curtis who blogs at GearScout (also part of the Military Times) wrote that the DoD appear to done a downselect, rather than awarding H&K an outright win ...

From what we understand, this is actually a downselect to just one system as opposed to a contract win

Dan send me an email regarding my previous comments on the supposed weight of the H&K IAR, which is almost identical to the standard HK416 carbine. He sent me the spec document which H&K provided him with. It does indeed list the weight as just 7.9 lbs!

Daniel E. Watters wrote that he suspects that the Marine command may have been framing the IAR as a partial M249 replacement but in reality they may have just wanted a piston operated full-auto carbine. By procuring what is sold as a new class of weapon they could sidestep the inter-service politics and bureaucracy ...

The weird thing is that the HK416 IAR is roughly the same weight as the M16A4, if not lighter when the latter is fitted with the M5 ARS. I'm certain that someone in Congress will ultimately ask what the HK416 can do that their issue M16A4 retrofitted with full-auto trigger groups can't.

Like others have mentioned, I can't help but wonder if the USMC didn't game the IAR requirements so that a basic carbine could win instead of a HBAR. The idea would be to gradually increase the number of IAR issued so that they could later justify standardizing on it to replace not just the infantry squad's M249, but their M16A4 and M4 as well. By framing it as a service-specific supplement to their M249, they skirted the need to argue with the other service branches over a set of joint requirements.

As for winning the contract, everyone needs to remember that Colt, FN, and HK were already awarded Indefinite Delivery/Indefinite Quantity contracts for their IAR last year. An IDIQ contract guarantees the awardee that they will have a specific minimum of items ordered, with the possibility of additional orders up to a specific maximum. There is no guarantee that more than the stated minimum will ever be ordered. I've long suspected that contracting officers have been purposefully making multiple awards of IDIQ contracts prior to a final downselect in order to head off potential award protests by the disgruntled losers. It is my understanding that by accepting their IDIQ award, the contractor only has grounds to protest if the guaranteed minimum has not ordered before the end of the contract. They cannot protest that they did not receive additional orders in excess of the guaranteed minimum.

Make of all this information as you will. All I know is that DoD procurement was never designed to be understood by a mere mortal such as myself!

The Brisbane-based weapons maker said this morning it has again given the first tranche of Assure Fast Holdings' $US35m funding due 7pm Brisbane time last night (8pm AEDT) another 24 hours and that it was now “testing the issue of solvency each day".

"The company has reduced its day to day expenditure to remain solvent for as long as possible to allow as much time as possible for this funding to be received," Metal Storm said in a statement.

Metal Storm share price (ASX:MST)

It would be sad if this company is forced to close and sell off their technology when it is just starting to show real promise.

MetalStorm 3GL Grenade Launcher (bullpup configuration)

Many thanks to Daniel E. Watters for the tip.

.38 Super

I built this .38 Super pistol in late 2000 for use in IDPA's Enhanced Service Pistol division. The frame and slide were from Caspian; each made from 416 stainless barstock. This was during the brief period that they offered barstock frames in addition to their usual cast frames. I had to lap the two together as their rails were purposefully cut oversize.

Starting from the top, the rear sight was the Novak LoMount, mated with a MGW front sight. I was delayed in completing the pistol by the lack of a front sight staking tool. A friend was supposed to lend me his MMC staking kit, but he couldn't find it. Ultimately, he did find it, but only after he had ordered a replacement from Brownells. I did most of the early test firing without a front sight by using the front sight slot as an index. The barrel and bushing were from Bar-Sto. The barrel was ramped, with a Clark/Para lower lug profile. I used a lug cutting kit from Brownells to fit the lower lugs of the barrel. I don't remember where I got the barrel links from, but I ended up having to buy a couple of kits to find an odd-ball size.

The firing pin was from Nowlin, and the oversized firing pin stop was from EGW. As few aftermarket vendors offered a stainless .38 Super extractor, I ended up buying a Colt high polished stainless extractor as that was the only one Brownells happened to have in stock. The guide rod was a two-piece model from Wilson Combat, as were the recoil springs. I bought one of their Spring Caddies that had different weight springs so I could tune it to the loads I was using. If I remember correctly, I ended up settling upon a 15 lb recoil spring.

For the lock work, I used a Wilson #299S Commander hammer as it was one of the few quality aftermarket hammers offered in stainless. This was mated with Wilson's Deluxe A6 sear. The short length Dlask trigger has a magnesium shoe and a titanium bow. A tab on the bow allows the trigger to be adjusted for pre-travel. The sear spring was from Nowlin, as I had previously found it very easy to tune. I ended up settling on either a 20 or 21 lb mainspring from Wolff Springs. After some tweaking and stoning, I ended up with a crisp 2 lb trigger pull. It was still as nice nearly 3 years later. (After a couple more years, the current owner eventually replaced the sear and disconnector with the low mass models from Cylinder & Slide. At last check, he was also considering replacing the hammer with one of the Doug Koenig models offered by EGW.)

The grip safety was a standard stainless model from S&A. While the frame was precut for a .250" radius, it still took little extra fitting to install the beavertail. The thumb safety was another Wilson product: their narrow extended tactical model in stainless. The stainless plunger tube was from Nowlin. The stainless extended .38 Super ejector was from King's. The original magazine release was a stainless extended model from Nowlin, but you can see from the photos that the current owner has replaced it. I used Ed Brown's stainless flat mainspring housing with 30 lpi checkering, which has since been discontinued.

The slide stop was originally one of the oversized EGW models that had recently been introduced in stainless. However, EGW had yet to offer a .38 Super specific slide stop, and occasionally, the follower of the Chip McCormick magazines would slip past the side stop. (A proper .38 Super slide stop has a longer engagement surface than its .45 ACP counterpart.) As a result, I ended up replacing the EGW slide stop with a stainless .38 Super model from Wilson. Oddly, the first Wilson slide stop would not seat flush with the frame. Upon closer inspection, I noticed that the slide stop's pin was warped. Thankfully, the shop had a second one to swap out. However, the manager of the shop ended up putting the defective part back into his display case. Speaking of magazines, I tried several different 10 round models before settling on the McCormick. The Wilson magazine was simply too hard to load to full capacity, and the follower of the MagPak magazine actually got stuck in the bottom of the tube once it was fully loaded.

The stocks were the Chip McCormick Slim Carry grips. As the name implies, these are thinner than standard stocks, and require their own shortened grip screws and grip screw bushings. The front strap of the frame was checkered at 30 lpi, which I cut by hand using a checkering file. You'll note that I didn't add any horizontal lines below the cutout for the front of the magazine baseplate. This allowed me to round over the ends of the vertical lines to keep them from snagging. I also beveled the magazine well using files. I prefer a deep angle, instead of the typical 45 degrees. At the time, Colt was cutting a deep bevel, but they didn't continue it to the rear of the magwell. I did a carry bevel on all of the parts, and I rounded over the bottom rear corner of the frame.

I regret that I never got a chance to bead blast the frame. However, at last check, the current owner hasn't done so either.

Funny story: A Highway Patrol firearm instructor moonlighted at a local range teaching CCW permit courses. He was seriously in love with the pistol. After I let him examine it, he handed it back to me, and I put it back in my range bag. We'd continue to talk, and then he would reach over to my range bag, unzip it, and remove the pistol in order to handle it some more. This process was repeated several times until it was time for his class.

UPDATE: Daniel has priced the parts for this pistol in the comments below.

Colt M1991A1 Compact .45 ACP

Hand cut 30 lpi checkering on front strap
Carry bevel, including rounding over bottom rear of frame
Ed Brown - beavertail grip safety
Wilson Combat - narrow extended thumb safety
Ed Brown - barrel bushing
Novak - Carry rear sight
Hogue - Kingwood stocks
King's - short aluminum trigger (black)

I also fit and blended in a S&A mainspring housing/magwell that was not installed at the time of the photo. In the process, I cleaned up the factory's half-hearted attempt to bevel the magwell. Also not visible is the EGW oversized firing pin stop.

Colt M1991A1 Compact

Colt Combat Commander (XS Series) .45 ACP

Carry bevel, including rounding over bottom rear of frame
Ed Brown - 30 lpi mainspring housing
Wilson Combat - beavertail grip safety (replacing Colt Competition part)
Heinie - SlantPro rear sight (replacing Colt Competition part)
Ahrends - Kingwood stocks
Videcki - short aluminum trigger

Not visible is the EGW oversized firing pin stop. As before, I cleaned up the factory's half-hearted attempt to bevel the magwell. The short-lived XS series was the product of the brief partnership of Colt with C-More, operating as Colt Competition. The XS series' rear sight, thumb safety, and grip safety were all patented designs from C-More's Ira Kay. When their partnership broke up, Kay took all of his designs with him. This led to Colt's XSE series, which reverted to the parts Colt previously used on their Enhanced series. Of the Kay's designs, only the grip safety lives on. It is now offered by Caspian and is standard on the SIG-Sauer 1911 models. Personally, I hate the design, as its "dragon's tooth" digs uncomfortably into the palm of my hand during recoil.

Colt Combat Commander

Many thanks to Daniel for the info and D.A. Murray for the photos.