Posts Tagged ‘Jeff Quinn’

Review of SCAR 16s

Jeff and Boge Quinn of GunBlast have reviewed the SCAR 16s and liked what they saw ...

With the MK 16, FN Herstal has set out to build the world’s best 5.56mm fighting rifle, and the SCAR 16s is as close to that rifle as most of us can get, legally. It is a well-built rifle, very reliable, easy to shoot, and match-accurate. The price tag to own such a piece is not cheap. As of this writing, the MSRP is bumping right up against the three thousand dollar mark. However, that is not too far out of line with some of the AR-based piston rifles available, and the SCAR system must be pretty good, as it beat out other designs for the USSOCom contract. FN manufacturers the great majority of our small arms now in use with U.S. troops, and the SCAR seems to be well-accepted by those who handled, fired, and fielded the new rifle. The SCAR 16s comes with one magazine and an owner’s manual, and is available either in black or the Flat Dark Earth finish shown here. You never regret buying the best.

dscf 0759 1 tm tfb Review of SCAR 16s photo
Thanks to Jason for the photo.

Hat Tip: Michael Bane and SaysUncle

 

Ruger SR-22 : AR-15 meets the 10/22

After having recently launched their first AR-15, the Ruger SR-556, Ruger have now unveiled the Ruger SR-22, a Ruger 10/22 in a tactical AR-15 configuration. For years we have been asking for it, and finally they have delivered!

Ruger SR-22

Jeff Quinn holds a tricked out SR-22

You are probably thinking that the action in the above rifle does not look much like a Ruger 10/22. This is because a standard Ruger 10/22 action and trigger group sits inside a Nordic Components designed conversion chassis / enclosure.

Nordic Components Stock Kit - very similar to the SR-22 rifle.

The chassis allows a standard AR-15 stock and pistol grip to be used on the rifle. It also allows a standard Ruger 10/22 barrel, which attaches to a v-Block, to be used with a the AR-15 style handguard. This breakdown photo illustrates how it all fits together:

The mid length handguard is drilled and tapped to allow picatinny rails to be installed on the 3,6,9 and 12 o' clock positions, if desired. These rails allow all standard AR-15 accessories to be used with the rifle.

sr 22 tr 3 picatinny rail tfb Ruger SR 22 : AR 15 meets the 10/22 photo
Ruger 3" SR-22 TR 3 Picatinny Rail ($14.95)

sr 22 full length picatinny rail tfb Ruger SR 22 : AR 15 meets the 10/22 photo
SR-22 Full Length Picatinny Rail ($39.95)

Ruger SR-22 Promotional Video

Another benefit of the SR-22 over a standard 10/22 is that the barrel is factory threaded and a Ruger SR-556 / Mini-14 flash suppressor is installed.

ruger sr 22 flash hider tfb Ruger SR 22 : AR 15 meets the 10/22 photo

Specifications
Receiver Ruger 10/22
Trigger Group Ruger 10/22
Caliber .22 LR
Pistol Grip Hogue Monogrip pistol grip
Capacity 10 Rounds
Finish Black, Hard Coat Anodized
Stock 6-Position M4-Style (on a Mil-spec diameter tube).
Barrel Length 16.12"
Groove 6
Twist 1:16" RH
Overall Length 32.35" - 35.25"
Weight 6.5 lbs
Flash Suppressor Mini-14 / SR-556 with 1/2”-28 thread
California Approved No1
Massachusetts Approved No
Front Sight(s) None
Rear Sight(s) None
Other Features Cross Bolt Safety
Suggested Retail Price (MSRP) $625.00

The Ruger press release:

Sturm, Ruger & Company, Inc. (NYSE-RGR) announces the introduction of the Ruger® SR-22™ Rifle, an autoloading, rimfire rifle that combines the legendary reliability of the Ruger® 10/22® with the ergonomics and configurability of the new AR-style Ruger SR-556™. The new SR-22 Rifle allows shooters to use economical .22 LR ammunition, while still enjoying the look and feel of an "AR" and experiencing the reliability they have come to appreciate from Ruger.

Because it utilizes the unique rotary magazine supplied with the Ruger 10/22, the SR-22 Rifle offers the same gold standard for reliability in autoloading rimfire rifles. Like the 10/22, the AR-style SR-22 Rifle also has an extensive array of accessories available, allowing shooters to select a custom configuration that best suits their tastes and needs.

The SR-22 Rifle uses a standard 10/22 action inside a top-quality, all-aluminum chassis that faithfully replicates the AR-platform dimensions between the sighting plane, buttstock height, and grip. The SR-22 Rifle provides a Picatinny rail optic mount, and includes a six-position, telescoping M4-style buttstock (on a Mil-Spec diameter tube), plus a Hogue® Monogrip® pistol grip. Buttstocks and grips may be swapped out for any AR-style compatible option.

The SR-22 Rifle also features a round, mid-length handguard mounted on a standard-thread AR-style barrel nut. Picatinny rails, specifically designed for this handguard, are available from Ruger, allowing the handguard to be configured to accept any number of rail-mounted sights or accessories. A barrel support block is installed in the handguard, ensuring accuracy and allowing the standard 10/22 V-block barrel attachment system to be used.

The SR-22 Rifle is equipped with a precision-rifled, cold hammer-forged alloy steel barrel. The 16-1/8" barrel is capped with an SR-556/Mini-14 flash suppressor mounted with a 1/2"-28 thread.

Jeff Quinn review the Ruger SR-22

More photos:

Ruger advertisement for SR-22:

Michael Bane has also created a video review over at the Down Range TV Blog. Michael hinted at the rifle earlier this week, but I must admit I did not imagine a tactical Ruger 10/22 was what Ruger had in store for us!


  1. Ruger currently state that the SR-22 is not California compliant. This may be a misprint.